Fermax AC PLUS Manual De Instrucciones página 20

AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit AC PLUS Central Unit
- Blocking / unblocking of doors.
- Temporary blockage of users, individually or by groups. Access is not permitted until
it is unblocked.
- Automatic change to summer/winter time.
- Anti-passback function, which prevents two people from using the same identifier to
enter the premises. The doors that form the perimeter of the premises are defined
and the location of the user (inside or outside this perimeter) is controlled when he/
she passes through these doors.
There are two anti-passback levels associated with the same identifier, depending
on whether they access the premises through a pedestrian or vehicle door (the type of
door is defined using the "AC PLUS Server" application).
It can be programmed so that all users must be outside the perimeter at a given time.
- Continuous testing of devices.
- Interaction of the PC software with the installation:
· Opening of doors.
· Blocking / unblocking of doors.
· Activation/deactivation of door sensors.
· Blocking users.
· Blocking groups of users.
· Door status display: open / closed / blocked / unblocked / alarm.
· Cancellation of blockage to an identifier blocked by anti-passback.
- Updating of firmware in the installation.
with new versions and functions and resolve problems.
- Connection to IP network for management from any PC in the installation.
- Activation of devices associated with each user, when he/she presents his/her identifier
to a reader.
- Activation of relays from a reader with keypad and proximity reader. Connection and
disconnection of alarms.
Makes it possible to update the central unit
Page 5