Gioteck RС-1 Manual De Instrucciones página 6

CONNECTION TO MULTIPLE CHAIRS
Connect one end of the mini audio cable into the INPUT Socket of Chair 1 (D)
and the other end into the OUTPUT socket of Chair 2 (E).
TROUBLESHOOTING
UNABLE TO CONNECT TO GAME CONSOLE
Gaming consoles with Audio / Video RCA Cable (included with most gaming
consoles) have 3 plugs : yellow video plug and 2 red and white audio plugs.
Follow instructions from gaming console manufacturer to connect to the
TV. NOTE: Leave Audio plugs (red and white) disconnected. Once properly
connected, follow Connection Guide to connect gaming console to chair.
Gaming consoles with coaxial cables (a thick cable used to connect a VCR
to the TV) cannot be directly connected to RC1 Beanbag. Instead, follow the
options below:
Option 1 : Connect gaming console to intermediary AV device (for example:
VCR, TV, DVD, TIVO, etc) using coaxial cable. Connect chair to audio out jack
on intermediary AV device. NOTE: Your intermediary AV device needs both: (1)
a coaxial jack, and (2) an RCA audio output jack (Audio Out Jack).
In the Connection Guide, follow set up guide for TV, DVD, Receiver to
complete connection of chair to intermediary device.
Option 2 : If your intermediary AV device does not have an 'Audio Out' jack,
purchase an RCA cable directly from the console manufacturer/dealer.
NO SOUND CAN BE HEARD FROM THE RC-1 BEANBAG
1] Is the gaming chair turned on? Check to ensure gaming chair power is on
by adjusting the volume knob on the control panel and the LED light will
illuminate.
2] Is the audio cable connected properly? Check your cable connection
carefully and make sure all cables are securely connected according to
the Connection Guide. For connecting the gaming chair to the TV or AV
source, the RCA Cables (not included) MUST be connected to the AUDIO
OUTPUT jack of your TV or AV source.
3] Adjust the Volume knob to ensure audio is at an audible level.
5
D E