Care and storage
1� Rinse Aqua+ with clean water and dry with a soft cloth�
2� Open the Aqua+ cover
and remove your sound
processor�
3� Check that the Aqua+ is thoroughly dry�
4� Put the two halves together and test the seal by pressing
down gently on the cover�
If any air leaks out you should not use it again�
5� If the seal is ok, separate the two halves again and place
your Aqua+ in your storage case or the Kanso 2 Activity
Kit's waterproof case until you want to use it again�
12
AQUA+ FOR KANSO 2 USER GUIDE