Fax +32 2 359 95 50
4.
5.
6.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don't change the page numbering. Keep the language
integrity.
1.Ensure the splash-guard (6) is fixed well.
2.Fit the required accessory (7, 8 or 9) onto
the motor spindle (5) on the underside of the
swivel arm(12).
3. Turn the accessory, so the pins on the
spindle are aligned with the hook inlets on
the accessory top edge. Press the accessory
against the swivel arm and turn it anti-
clockwise at the same time until the pins
engage and the accessory locks into
position securely. The accessory must not be
loose, nor should you be able to pull it free.
1.Lower the swivel arm(12) so that it locks
into place with a ‚click'. The lid must fit
tightly with the mixing bowl(10), otherwise it
is fitted incorrectly. The appliance is now
ready for use.
2. Plug the power cord into main power
outlet and switches it ‚ON'. Turn the speed
control knob to a speed setting. The
indicator light on the control panel will
illuminate.
3. Select the speed you want using. Speed
button 1 is the slowest and speed button 6 is
the fastest speed.
Recommended speeds, time and capacity
are shown in the table above.
4. If you need to scrape inside the mixing
bowl, wait until the accessory has stopped
completely. Use the spatula, never your
fingers.
1.Switch off the appliance by turn knob to
‚O' when you have finished mixing. Switch
off the appliance and unplug it before you
change the accessories, or before you take
the appliance apart or when not in use.
2.Turn the swivel arm release button (1)
clockwise, while lifting the swivel arm with
the other hand so that it locks into place
with a ‚click'.
8
TKG M 3014 - VG M 3014
Assembly page 8/56
- 181109