OPERATING INSTRUCTIONS
TEMPERATURE CONTROL
1. Power Button: Press the power button once to
turn the appliance on. Press and hold the power
button for 3 seconds to turn the appliance off.
2. Light Button
3. Power Light: Indicator light illuminates to signify
that cooling mode is currently in operation.
4. °C / °F: Indicator lights signify which
temperature scale is being displayed.
5. Temperature Display: Shows the set
temperature.
6. Up and Down Buttons: Used to increase or
decrease the set temperature in 1° increments.
3
1
2
INTERIOR LIGHT
The interior light will default to turning on and off
when the door is opened or closed.
Press the light button once to turn the light off while
the door is open. The light will resume default
functioning when the door is closed.
There are three light mode settings:
• L1: The light will turn on and off when the
door is opened and closed.
• L2: The light will remain on indefi nitely at
100% illumination.
• L3: The light will remain on for 60 minutes at
100% illumination and then turn off.
• L4: The light will remain on for 60 minutes at
50% illumination and then turn off.
To change the light mode, press and hold the light
button for 3 seconds until L1 fl ashes on the display.
Press the up or down button to change between
modes. The display will fl ash the chose mode 3
times to confi rm.
4
°C
°F
5
STORAGE INSTRUCTIONS
This appliance can hold a maximum of 63 wine
bottles in 750 ml size.
Place 16 bottles on the top shelf.
Place 9 bottles alternately (heat-to-tail) on shelves
two through fi ve.
Place 11 bottles on the bottom shelf.
6
SHELF INSTRUCTIONS
To remove a shelf tilt one side up and pull the shelf
outward.
To replace a shelf, ensure the shelf is resting
securely on the support brackets and push inward
until it locks into place.
5
Note: Do not cover
shelves with aluminum
foil or any other
material that will
prevent air circulation
within the appliance
as this can adversely
affect the internal
temperature.