Control Panel; Interior Light - Danby Silhouette Professional SPRWC053D1SS Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Standard mode indicator light
2. Energy saving mode indicator light
3. Sabbath mode indicator light
4. Demo mode indicator light
5. Interior light setting indicator light
6. Interior light colour setting indicator light
7. Alarm indicator light
8. Disable door alarm indicator light
9. Upper display panel: Shows the set temperature
of the upper chamber.
10. Lower display panel: Shows the set temperature
of the lower chamber.
11. Power indicator light: Illuminates when the
compressor is running.
12. Upper chamber indicator light
13. Lower chamber indicator lights
14. Temperature scale indicator lights
15. Increase and decrease buttons:
increase or decrease the set temperature 1°
increments.
16. Mode button: Press to toggle between standard
and energy saving mode. The relevant indicator
light will illuminate. The appliance will default to
standard mode.
17. Light Button: Used to set the light mode.
18. Power button: Press to turn the appliance
on. Press and hold for 3 seconds to turn the
appliance off.
9
14
12
Used to
10
11
15
13

INTERIOR LIGHT

The interior light will default to turning on and off
when the door is opened or closed.
Press the light button once to turn the light off while
the door is open. The light will resume default
functioning when the door is closed.
There are four light mode settings:
• L1: The light will turn on and off when the
door is opened and closed.
• L2: The light will remain on indefi nitely at
100% illumination.
• L3: The light will remain on for 120 minutes
at 100% illumination and then resume
default operation.
• L4: The light will remain on for 120 minutes
at 50% illumination and then resume default
operation.
To change the light setting, press the light button
once to display the current setting. Press the light
button repeatedly to choose the desired light setting.
The display will fl ash the chosen setting 5 times to
confi rm.
INTERIOR LIGHT COLOR
The interior light can be set to either white or blue.
Press and hold the light button for 3 seconds until
the interior light color symbol fl ashes, then press the
light button to toggle between a white or blue light.
The interior light colour setting indicator light will
fl ash 5 times to confi rm.
2 3
1
Sab Demo
Std Eco
14
15
16
5
4 5 6 7 8
17
18