Publicidad
Idiomas disponibles
Idiomas disponibles
Εnglish
Certification
ATEX
IECEx
Note
The PS AC120/230V power supply with device category
2G may be used in zone 1 hazardous areas.
Installation
Danger
It is possible that sparks or impermissibly high surface
temperatures may occur during the installation. Never
perform an installation under explosive conditions!
In making the installation, observe the EN 60 079-14
regulations.
The PS AC120/230V power supply must be mounted in
Zone 1 in an enclosure with the Ex e degree of protection.
In Zone 2, the PS AC120/230V power supply must be
mounted in an enclosure providing a degree of protection
of at least IP 54 (must have manufacturer's statement for
Zone 2).
Wiring the TM-PS-A UC/TM-PS-B UC terminal submodule
When laying the cable and connecting the submodule,
observe the regulations in EN 60 079-14 plus any
applicable national regulations.
A5E02433496-01
II 2 G and I M2
Ex de [ib] IIC T4; Ex de [ib] I
KEMA 09 ATEX 0156
IECEx KEM 09.0070
Εnglish
CE
0344
Publicidad
