Handling; Prior To The Initial Commissioning Of The Voxter Vt5 - ACD GRUPPE Voxter VT5 Set Manual Del Usuario

3 Handling

3.1 Prior to the initial Commissioning of the Voxter VT5

In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into
the supplied Voxter Elite Charger (if included in the scope of delivery), also see Section 3.2. Using the
supplied power supply unit, connect the docking station to the mains, also see Section 3.2.
The battery charging process has been completed when the LED is green.
You can now use the Voxter VT5.
You can see the battery charging process in Figure 2.
ATTENTION
ATTENTION
ATTENTION
Voxter VT5 Set_Brief Overview_Resumen breve_FCC_V1.01_en_es.docx
Read all instructions first before using the Voxter VT5!
Do not drink any alcohol or take any drugs while using the Voxter
VT5 and follow the saftey instructions carefully!
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the Voxter VT5 and the Voxter
Elite Charger. The utilization of non-approved components can
lead to the destruction of the device. Remove the battery from the
device if it is not used for an extended period of time.
The Voxter VT5 battery is a lithium ion battery pack. Lithium ion
battery packs can explode if exposed to fire. Do not disassemble
the battery pack and do not expose it to fire or heat (greater than
140 °F).
Prior to each use, the voice client, the docking station and the
connection cables must be inspected for damages. Damaged parts
must be replaced. Please contact ACD in either case.
5 / 30