Publicidad
Idiomas disponibles
Idiomas disponibles
Handle:
parts in place with the two screws and plastic
nuts.
two nut knob (7) and its screws.
its support guide rope.
3
1
10
7
Cutting height adjustment:
10
Side discharge option:
attach the side discharge chute (20) onto the
deck and release the side discharge cover.
Operation:
Engine starting:
CAUTION: Engine is delivered without oil; add
600ml of all-temperature use, SAE 10W- 30
oil before starting the engine. Always use a
4 stroke motor oil that meets or exceeds the
Filling up with oil:
this will cause damage to the engine parts
mower is on level ground.
2
cap is clean
4
oil in until the "FULL" line on the dipstick. DO
6
NOT OVERFILL.
do not screw in. Remove the dip- stick/oil cap
again and check the oil level.
Filling up with petrol:
fuelling. Never open or remove the petrol cap
while the engine is on.
contamination.
pressure.
petrol tank without causing any spillage.
curred.
from where the spillage occurred (If any).
-
-
Publicidad
