IVT CS-185-RC Manual De Instrucciones página 10

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
No-load speed [RPM]
Blade diameter [mm]
Blade bore diameter [mm]
Blade thickness [mm]
Max. cutting depth 90° [mm]
Max. cutting depth 45° [mm]
Weight [Kg]
Safety class
PART LIST
1. Dust extraction outlet
2. Cutting depth ruler
3. On/Off switch
4. Saw blade safety casing
5. Auxiliary handle
6. Case inclination ruler
7. Clamping screw of the parallel guide
8. Wing screw for angle adjustment
9. Base plate
10. Saw blade
11. Movable safety guard
12. Saw blade fixing bolt
13. Outer flange
14. Parallel guide
15. Ventilation slots
16. Lock-off button
17. Clamping screw of the cutting depth ruler
18. Spanner
19. Clamping screw of the base plate
20. Inner flange
CONTENT OF THE BOX
Instruction manual (1 pc), parallel guide (1 pc), spanner
(1 pc), auxiliary handle (1 pc), carbon brushes set (1
pc).
INTENDED USE
This model row of circular saw is intended for sawing
wooden workpieces. The machine is only suitable for
right-hand use.
Model CS-185-RC
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
The tool must be assembled correctly before use.
Only use the tool for its designed purposes.
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
Never leave the tool unattended.
Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is
in use.
The user is responsible for third parties while working
with the tool.
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
10
230 ~ 50
1400
5500
185
25.4
1.2
62
45
4.5
II