LevelOne WAP-6221 Guía De Instalación Rápida página 4

Installation
LED/Button/Interface Description
WIFI SSID Broadcast
To turn on or off the WIFI SSID Broadcast
ON/OFF
With the AP powered on, press the Reset
button for 10 ~ 12 seconds until the Signal
Reset to Defaults Strength LED blink faster than ever. The
AP will restart itself and reset the device to
factory default settings.
The LAN port is used to connect to network
LAN port
devices, such as a switch or PC / NB
USB port Charge USB devices (5V1A)
The WAN/POE port is used to connect to
network devices, such as a POE switch
WAN/POE Port OR POE adapter to power the device
( IEEE802.3af ) 48 VDC. (POE adapter
unit is to be ordered separately)
-3-