EnGLIsh
These battery packs may be used: DCB546 and DCB547.
Refer to Technical Data for more information.
Package Contents
The package contains:
1 Drill
1 Side handle
1 Chuck key
1 Bali Handle
1 Charger
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3 models)
1 Instruction manual
1 Kitbox
nOTE: Battery packs, chargers and kitboxes are not included
with N models.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The date code
, which also includes the year of manufacture,
16
is printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Bail handle
1
Speed selector lever
2
Forward/reverse button
3
Trigger switch
4
Bail handle bolt
5
13 mm keyed chuck
6
Anti-Rotation System indicator
7
Main handle
8
30
Worklight
9
Chuck key
10
Intended Use
The DCD460 heavy-duty stud and joist drill is designed for
professional drilling at various work sites (i.e., construction sites)
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty stud and joist drills are professional
power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Torque
WARNING: This is a high-torque drill. To reduce the risk
of serious personal injury, ALWAYS hold tool firmly with
both hands in the proper position for operation as shown.
Torque is the twisting action the drill produces in regards to
the rotating bit. As the drill bit meets resistance in the material
being drilled, the motor responds by adjusting the output
torque to meet the requirement up to the maximum capacity of
the motor and gear system.
Bracing the Tool (Fig. C, G)
WARNING: To reduce the risk of serious personal injury,
ALWAYS hold or brace the tool securely in anticipation of
a sudden reaction.
With hands in the proper hand position (also refer to Fig. G),
brace the tool as shown in Figure C.
The bit rotates clockwise when the tool is in the forward
position and counterclockwise when the tool is in the reverse
position. If the bit binds, the tool will slow to a manageable
level. Using proper hand position, brace the side handle
tool body against a stud for better support (Fig. C).
Clutch (Fig. A)
The DCD460 is equipped with a mechanical slip clutch. The
clutch is active when the low speed
bit or cutter bites into the workpiece, the clutch will slip and a
ratcheting sound will be heard. Release the trigger. Continued
clutching of the tool will reduce the life of this feature.
Anti-Rotation System (Fig. A)
The DCD460 is equipped with the D
This feature senses the motion of the tool and reduces the
motor torque to a manageable level if necessary. The anti-
rotation system indicator
7
will illuminate to indicate status.
13
or
2
is selected. When the
WALT anti-rotation system.
e