Translation of the original instructions
DESCRIPTION AND ASSEMBLY ISTRUCTIONS
(See fig. ①②)
AA Electrical power cord
A
Motor head
B
Switch
C
Metal flexible hose (for ash)
D
Metal straight lance (for ash)
E
Filter-retaining X-V disc
F
Tank (for ash)
G
Head on tank locks
H
Suction inlet
I
Tank (for powders/liquids)
L
Flexible hose (for powders/liquids)
INTENDED USE:
WET & DRY VACUUM CLEANER
• The appliance is intended for use as a wet and dry
vacuum cleaner.
• Failure to comply with the abovementioned con-
ditions will lead to cancellation of the guarantee.
INTENDED USE:
ASH VACUUM
• The appliance is intended for non professional
use.
• It has been designed to vacuum only cold ash; it
is not suitable for boilers or for fuel oil stoves nor
can it be used for plaster powder or cement dust.
Area of application
• Substance to be vacuumed – cold ashes from fire-
places, wood/coal stoves, ashtrays, grill.
• Empty and clean vacuum cleaner before and af-
ter vacuuming to avoid the collection of materials
that could pose a fire hazard in the vacuum clea-
ner.
Restriction of use
• Do not use for the separation of health-hazardous
dusts (dust classes L, M, H).
• Do not vacuum soot.
M
Extension tube (for powders/liquids)
O
Couplings for locking drums together
P
Double function brush
(floor/liquids accessory)
R
Flat lance (for powders/liquids)
T
Filter reset lever
U
Metal round brush (for ash) optional
V
Filter (wet cleaner)
X
Filter (for ash/for powders)
Y
Filter (for ash) optional
• Vacuum only ashes from admissible fuels.
• Do not vacuum any hot, burning or glowing
objects.
• Do not vacuum any object that are hotter than >
40 °C.
• Do not vacuum any flammable substances.
SYMBOLS
CAUTION! It is important to be careful on sa-
fety grounds.
IMPORTANT
Optional: IF PRESENT
Double insulated (IF PRESENT): supple-
mentary insulation is applied to the basic
insulation to protect against electric shock in
the event of failure of the basic insulation.
Accessories not suitable for ash suction
11
EN