Installation instructions
Remove oven door(s)
A
A. Oven door hinge lock in locked
position
B. Oven door hinge lock in unlocked
position
22
English
NW9000K_MOD_DOB30M977DS_DG68-00923A-01_EN+MES+CFR.indb 22
B
Open the oven door.
1.
2.
Locate the oven door hinge locks in
both corners of the oven door, and
then rotate the hinge locks toward the
oven door to the unlocked position
(see illustration B). If the door hinge
lock is not rotated fully, the door will
not remove properly.
3.
Partially close the door to engage the
door latch locks.
The door will stop at this point.
Using two hands, grasp the edges of
4.
the oven door. Lift and pull the oven
door toward you and remove. You
may need to gently shift door from
side to side as you pull.
Set the oven door(s) aside on the
5.
prepared covered work surface with
the oven door resting on its handle.
6.
To continue with the oven installation,
go to the "Positioning Oven Feet for
Multiple Cabinet Cutout Heights"
section.
10/16/2019 12:50:51 PM