Installation instructions
24
English
NW9000K_MOD_DOB30M977DS_DG68-00923A-01_EN+MES+CFR.indb 24
4.
Lower the oven door to the fully
open position. If the oven door does
not open to a full 90°, repeat steps 1
through 3.
5.
Locate the oven door hinge locks in
the corners of the oven door, and
rotate the hinge locks toward the oven
cavity to the locked position.
See Step 1 (illustration A) in the
"Remove Oven Door(s)" section for
proper locked position.
6.
Close the oven door.
7.
When the hinges are properly installed
and the door closed, there should be
an even gap between the door and the
control panel. If one side of the oven
door is hanging lower than the other,
the hinge on that side is not properly
installed.
8.
Connect Wire Harness.
10/16/2019 12:50:51 PM