Technical Data - Burda RCA100VINDU Instrucciones De Montaje Y Uso

I :
NSTALLATION
• The appliance should be fitted and connected
by a qualified electrician.
• Prior to starting any electrical work, the voltage
must be switched off to make sure that the
wiring is dead!
Only switch on the appliance when
installation is complete.
S
WITCHING ON FOR THE FIRST TIME
• After switching on the appliance for the first
time and following extended periods on non-
use, the appliance may smell for a short time.
C :
LEANING
• First, disconnect the equipment from the
power supply system!
• After the appliance has cooled down, the
housing can be wiped dry.
• Do not touch the quartz rods with your fingers,
since stains could build up from such a contact.
• The reflector should be cleaned regularly
• Do not use any abrasive or caustic cleaning
agents!
• Never immerse the appliance in water! Danger
to life!
A -S S :
FTER ALES ERVICE
• All repairs must be referred to authorised
personnel! Therefore, you should contact your
specialized dealer or the customer service.
Important! Any tampering with the appliance
will invalidate the warranty.
• Repairs carried out improperly and by
unqualified persons may have serious
consequences for the user!
T :
ECHNICAL DATA
Rated voltage: 230 V/50 Hz
Rated output: 1000W/1650W/2000W
Dimensions (LxWxD): 50,2/61,5x9,5 x 12,5cm
Weight about: 2,0/2,3 kg
Protective system: IP67
:
GB