Parkside PDRP 6.2 B2 Traducción Del Manual De Instrucciones Original página 7

■ Use the compressed air cleaning gun only in
well ventilated areas.
■ Please ensure that you have read and under-
stood the safety instructions regarding multiple
hazards before installation, operation, repair,
service and replacement of any accessories
and before work near the compressed air
cleaning gun. Otherwise, there is a risk of
serious physical injuries.
■ The compressed air cleaning gun should only
be set up, adjusted or used by qualified and
trained operators. The compressed air cleaning
gun must not be modified in any way. Modi-
fications can reduce the effectiveness of the
safety measures and increase the risks for the
operator.
■ Do not lose the safety instructions – hand them
to the operator.
■ Never use a damaged compressed air cleaning
gun.
■ The compressed air cleaning gun must be
serviced regularly to check that all required
safety instructions for compressed air tools and
markings such as working pressure or volume
flow are legibly marked on the compressed
air cleaning gun. The user must contact the
manufacturer to obtain replacement labels if
necessary.
■ Use the compressed air cleaning gun only in the
application areas for which it was designed!
■ Use the compressed air cleaning gun only at
the specified pressure (max. 6.2 bar).
■ Never connect the compressed air cleaning
gun to a compressed air hose whose pressure
exceeds 6.2 bar.
■ Never use hydrogen, oxygen, carbon dioxide
or other gas in bottles as sources of energy for
this tool, as this can lead to an explosion and
consequently serious injuries.
│ GB │ IE
■ 4
■ Maintain and clean the compressed air cleaning
gun on a regular basis as specified (see section
"Maintenance and cleaning").
■ Check the compressed air cleaning gun for any
damage before use. Before each use, make
sure that the compressed air cleaning gun is in
perfect condition.
■ Remain alert at all times! Unexpected move-
ments of the compressed air cleaning gun can
cause hazards.
■ Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the compressed air cleaning gun in unexpected
situations.
■ Do not use a compressed air cleaning gun
whose trigger is defective.
A compressed air cleaning gun that can no
longer be switched on or off is dangerous and
must be repaired.
■ Store the compressed air cleaning gun out
of the reach of children when not in use.
Do not allow anyone to use the compressed
air cleaning gun who is not familiar with it or
has not read these instructions. Compressed air
cleaning guns are dangerous in the hands of
inexperienced users.
■ Maintain the compressed air cleaning gun with
care. Check whether moving parts function
correctly and do not jam; check whether any
parts are broken or damaged to an extent
that the compressed air cleaning gun will no
longer operate correctly. Arrange for damaged
components to be repaired before using the
compressed air cleaning gun. Many accidents
are caused by poorly maintained compressed
air cleaning guns.
■ Use personal protective equipment. Always
wear eye protection. Wearing personal protec-
tive equipment such as a dust mask, non-slip
safety shoes, safety helmet or ear muffs, de-
pending on the type and use of the compressed
air cleaning gun, reduces the risk of injury.
PDRP 6.2 B2