Fein KBM 50 Q Manual Original página 25

OBJ_BUCH-0000000110-006.book Page 25 Wednesday, April 4, 2018 2:20 PM
Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and
the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Before commencing this work step, pull the mains plug out of the socket. Oth-
erwise there will be danger of injury if the power tool should start unintention-
ally.
Use eye protection during operation.
Use ear protection during operation.
Do not touch the rotating parts of the power tool.
Hot surface!
Do not reach in!
General prohibition sign. This action is prohibited.
Confirms the conformity of the power tool with the directives of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal
injury.
Worn out power tools and other electrotechnical and electrical products
should be sorted separately for environmental-friendly recycling.
1st gear/2nd gear
Tap
Steel
Low speed
High speed
Magnetic holding power, sufficient
Magnetic holding power, insufficient
Starts the drill motor. Rotation direction: clockwise
Stops the motor
Starts the drill motor. Rotation direction: clockwise
Starts the drill motor in inch mode. Rotation direction: anticlockwise
en
25