Cardin Elettronica S508 Manual De Instrucciones página 18

• Memorizing a channel code
- Move the transmitter near to the receiver.
- Press and hold down the
the display.
- Press the button (channel) you wish to memorize on the transmitter. The
appear on the display.
- Press the button (channel) you wish to memorize on the transmitter a second time.
- A message symbol such as
- If the channel is already present its receiver memory location will be shown and the procedure
cancelled.
• Cancelling a channel/transmitter
- Using the
You must already know the memory location where the channel/transmitter you wish to
cancel is stored.
- Press the key to activate the procedure. After twenty seconds of inactivity the proce-
DEL
dure will terminate automatically.
- The following symbol will appear on the display
dure and leave the content of the memory location unchanged.
- Using the
will be shown in the order:
- Press the key to cancel the selected channel/transmitter.
DEL
- The cancellation of the channel/transmitter will be confirmed by the symbol
on the display.
- After two seconds the receiver will return to the normal operating mode.
button on the receiver. The
MEMO
will appear for 2 seconds on the display.
keys, scroll through the memory locations until you find the desired one.
keys, select the channel you wish to cancel. Only memorised channels
,
. From here you may quit the proce-
, , ,
18
symbol will appear on
symbol will
(all locations),
appearing
(quit).