Farfisa Alba CV2124AB Manual Del Usuario página 27

Single-Button
000- 000-
P1 - P1
099 099
000- 000-
P2 - P2
100 100
004- 004-
P3 - P3
136 136
004- 004-
P4 - P4
137 137
004- 004-
P5 - P5
138 138
004- 004-
P6 - P6
139 139
004- 004-
P7 - P7
140 140
004- 004-
P8 - P8
141 141
Double-Button
004- 000-
P3 - P1
136 099
004- 000-
P4 - P2
137 100
004- 004-
P9 - P5
142 138
004- 004-
P10 - P6
143 139
004- 004-
P11 - P7
144 140
004- 004-
P12 - P8
145 141
004- 004-
P17 - P13
150 146
004- 004-
P18 - P14
151 147
To complete the programming, you must pro-
gram t he button P7 w ith t he fi rst address of t he
third group (Block 007 Device 150) by entering
the following values:
----------------------------------------------
223+P1+007+P7(>4sec.)+224+P1+150+P7(>4sec.)
----------------------------------------------
after this phase the buttons will call the de-
sired addresses:
Single_Button
000- 000-
P1 - P1
099 099
000- 000-
P2 - P2
100 100
004- 004-
P3 - P3
136 136
004- 004-
P4 - P4
137 137
004- 004-
P5 - P5
138 138
004- 004-
P6 - P6
139 139
007- 007-
P7 - P7
150 150
007- 007-
P8 - P8
151 151
Double-Button
004- 000-
P3 - P1
136 099
004- 000-
P4 - P2
137 100
007- 004-
P9 - P5
152 138
007- 004-
P10 - P6
153 139
007- 007-
P11 - P7
154 150
007- 007-
P12 - P8
155 151
007- 007-
P17 - P13
160 156
007- 007-
P18 - P14
161 157
Continue with the next programming or exit
programming.
Muting the call in progress tone (code
323)
When the call is sent, the external door station
emits a call in progress tone when the indoor
station rings. This tone, if not desired, can be
muted through the steps described below.
enter code 323;
press button 1/ to confirm;
to enable muting enter the value 111; to
disable muting enter the value 222;
press button 1/ to confirm;
continue with the next programming or exit
programming.
Closing the call when the door lock open-
ing command is received (code 324)
The Cx2124AB module can be programmed
to close the conversation with the internal
station when the door lock opening command
is received. The function can be enabled using
the steps described below.
Enter code 324;
press button 1/ to confirm;
to enable the function enter the value 111;
to disable the function enter the value 222;
press button 1/ to confirm;
continue with the next programming or exit
programming.
Video intercom programming
The FARFISA DUO systems and the ALBA series
push-buttons panel allow you to quickly and
easily program the intercoms or video-in-
tercoms inside the apartments. Simplified
programming procedures differ depending
on whether they are intercoms or video in-
tercoms with automatic or manual address
programming.
Video intercom systems with automatic
address programming
Arrange the intercom or video-intercom for
automatic programming (see the relevant
product manual);
on the door station, press the button to which
you want to associate the call;
on the intercom or video-intercom, exit the
automatic programming (see the relevant
product manual);
proceed in the same way for all devices to
be programmed.
Video intercom system with manual ad-
dress programming
Note the address that is called by the door
station buttons as shown in the following
figures, depending on whether it is a single
or double button door station;
on the intercom or video-intercom, move the
micro-switches in order to set the address
associated with the call button that is to
be assigned to the device (see the relevant
product manual);
proceed in the same way for all devices to
be programmed.
Single-Button
109
110
099 111
100 112
101 113
102 114
103 115
104 116
105 117
106 118
107 119
108 120
Double-Button
123
119
124 120
101 099 125 121
102 100 126 122
107 103 131 127
108 104
128
132
109 105
133 129
110 106 134 130
111
115 139 135
116 112 140 136
117 113 141 137
118 114 142 138
Mi 2530/1
121
122
123
124
125
126
127
128
129
130
131
132
147
143
148 144
149 145
150 146
155 151
152
156
157 153
158 154
163 159
164 160
165 161
166 162
- 27 -