Mopar 82215729 Manual De Instrucciones página 2

1. Place top clamp half on tube. From opposite side of
tube, slide bottom half through channel in top half of
clamp.
2. Slide gasket between clamp and tube.
3. Secure clamp to tube using supplied bolts, flat
washer, lock washer, and nuts. Tighten to 14 Nm (10
ft-lbs).
4. Attach light to flange on clamp per manufacturer's
instructions.
5. Fold and place instructions in vehicle glove box.
For customer service questions refer to your Chrysler,
Dodge, Jeep, Ram or Fiat dealership.
November 8, 2017
Light Mounting Bracket
Jeep Wrangler
2
www.mopar.com
K6862848