sylvac D302 Manual Del Usuario página 64

64 bits formatted probe
position
64 bits formatted min.
value
64 bits formatted max.
value
Access to bits 0000-0031
Formatted Preset value
Nominal value for tole-
rance, formatted.
Formatted upper tole-
rance
Formatted lower tole-
rance
Multiplying factor
64 bits formatted preset
value
64 bits nominal value for
tolerance, formatted
Resolution
Probe calibration constant
Type of probe
Tolerance statuses
Formatted probe posi-
tions of correction pp
A Formatted probe correc-
tions of correction pp
0032 F64
0036 F64
0040 F64
0056 2x16
0060 F32
0062 F32
0064 F32
0066 F32
0068 32
0100 F64
0104 F64
0120 16
0160 F32
0164 32
0165 16
0240 26xF32
0300 26xF32
64
RO Formatted probe position (see below)
RO Formatted probe position (see below)
RO Formatted probe position (see below)
RW See corresponding bits (probe A)
RW Formatted probe position (see below)
RW Formatted probe position (see below)
RW Formatted probe position (see below)
RW Formatted probe position (see below)
RW
RW Formatted probe position (see below)
RW Formatted probe position (see below)
0: 0.1um
1: 1um
2: 10um
3: 100um
RW
4: 0.5um
5: 5um
6: 0.1um rapid read
7: 1um rapid read
RW
Bit 0: probe P10
Bit 1: probe P25
RW Bit 2: probe P50
Bit 3: probe P5 or P2
Other bits reserved for future use
Bit 0: Active tolerances
Bit 1: Outside tolerances, reject
Bit 2: Outside tolerances, rework
Bit 3: Within tolerances
Bit 5: Probe error
Bit 6: External tolerances
RO Bit 7: Internal tolerances
Bit 8: Outside Min/Max tolerances,
reject
Bit 9: Outside Min/Max tolerances,
rework
Bit 10: Within Min/Max tolerances
Other bits reserved for future use
Formatted probe position but without
RO
Preset (see below)
RO Formatted probe position (see below)