Lamp cartridge replacement
A guide for the lamp cartridge replacement is approximately
2 years when the appliance is used at the recommended
frequency and time.
The lamp cartridge replacement period is approximately
20 000 flashes.
Replacement period notification
The cartridge confirmation lamp (red) glows when the power is
turned on with less than approximately 1 000 flashes remaining.
The cartridge confirmation lamp (red) blinks when turning the
power on if the lamp cartridge replacement interval has come.
(See page 17.)
Replacement and resetting of the lamp cartridge
1. Press
to turn the power off.
2. Remove the lamp cartridge.
1 Remove the frame.
2 Remove it by pulling it straight in the
direction of the arrow.
• Do not use a lamp cartridge that has been used. (Doing so
may cause damage to the lamp cartridge.)
3. Attach a new lamp cartridge.
1 Insert it straight in the direction of the
arrow.
• Insert it firmly all the way in.
2 Attach the frame.
Insert until it clicks.
4. Press and hold (for approximately 3 seconds)
appliance beeps to reset it.
• Replacement is complete if the cartridge confirmation lamp
(red) blinks twice and the alarm beeps.
• The power will not turn on unless the reset is completed.
Notes
• Always reset the appliance immediately after replacing the lamp
cartridge. (The appliance cannot be reset if too much time has
passed since replacing the lamp cartridge.)
• If the reset operation cannot be completed, recharge the appliance,
reattach the lamp cartridge again and reset the appliance.
►Replacement parts
Replacement parts are available at your dealer or Service Centre.
Replacement lamp cartridge
SELECT
until the
WES2W13
19