Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1
BEFORE STARTING THE INSTALLATION PROCEDURE
Carefully read this manual.
Installation and maintenance should be carried out by technical
personnel qualified for this type of machine, in compliance with
current safety regulations.
When receiving the unit please check its state verifying if any
damage occurred during the transport.
For installation and use of possible accessories please refer to
the pertinent technical sheets.
Identify the model of the ART-U fan coil following the indications
on the packing container. See paragraph Configurator p. 7.
SAFETY SYMBOLS
Carefully read this manual.
Warning
Use personal protective equipment
2
INTENDED USE
Galletti S.p.A. will not accept any liability for damage or injury
caused as a result of installation by non-qualified personnel; im-
proper use or use in conditions not allowed by the manufactur-
er; failure to perform the maintenance prescribed in this manual;
INSTALLATION SITE
When choosing an installation site, you should observe the fol-
lowing rules:
Ū The air conditioning unit should not be placed immediately
under a socket
Ū Do not install the unit in places where inflammable gases or
powders are present
3
UNIT DESCRIPTION
Fan coil unit with Design cabinet, minimum depth and BLDC motor. See figure 11.1 Exploded view p. 60.
DESIGN-DRIVEN INNOVATION
From the extensive experience of Galletti in the development
and design of fan coil units, and in confirmation of its continu-
ous search for innovation, has been created ART-U, the result of
a perfect combination of performance and design.
The ambitious goal of this project was to develop something
absolutely new and unique, a product not yet present on the
market, which on the one hand was able to meet the increasing-
ly stringent demands for energy efficiency, while on the other
hand could, for the first time, reflect the latest trends in furnish-
ings and interior design.
With the new ART-U, Galletti this goal has been fully achieved,
presenting on the market a new concept of hydronic indoor
unit, a product that is characterized by its enviable technical
16
ART-U
WARNING:
Electrical and electronic products may not be
mixed with unsorted household waste. Do NOT try to dis-
mantle the system yourself: the dismantling of the system,
treatment of the refrigerant, of oil and of other parts must be
done by an authorized installer and must comply with appli-
cable legislation. Units must be treated at a specialized treat-
ment facility for reuse, recycling and recovery. By ensuring
this product is disposed of correctly, you will help to prevent
potential negative consequences for the environment and
human health. For more information, contact your installer
or local authority.
use of spare parts other than original factory parts.
Equipment designed for ambient air conditioning and intended
for use in civil comfort applications.
Ū Do not expose the unit to sprays of water
Ū Install the fan coil on walls able to withstand its weight. Keep
a clear space all around the unit to assure the proper func-
tioning and accessibility for maintenance
Ū Store the unit in its packing container until you are ready to
install it to prevent dust from infiltrating inside it.
performance and at the same time represents a true style shift
in a field that has long been dominated by products that are all
very similar to each other.
ART-U, with its width that in some places is only 10 cm, and
thanks to its unique lines, was designed to be an absolutely
all-purpose product, that adapts perfectly to rigorous and es-
sential environments as well as to warmer and more sophisticat-
ed spaces. Thanks also to the possibility of customizing the front
panel, ART-U meets the demand for ever more personalization
of the spaces to be furnished.
The achievement of extremely high aesthetic standards has
not weakened the usual construction integrity of Galletti prod-
ucts: striving for innovation has in fact also focused on the
Publicidad
Capítulos
Tabla de contenido
