GEONAUTE FX Quechua 700 Manual Del Usuario página 11

4.3.4
With this function you can monitor two channels at the same time. The device continuously monitors the primary
channel (the channel set in the standard way, see p. 7) and the secondary channel (the channel chosen when
the DCM function is activated, see below).
Activate
or
Choose 0 to 38
As soon as the device detects a signal on one of the two channels, the device will remain on the channel in question
for at least 5 seconds, after which continuous scanning resumes.
If you press the PTT button during reception, the device will transmit on the channel in question.
If you press the PTT button when no signal is received, transmission will take place on the primary channel.
Deactivate
Channel
or
Choose 1 to 8
DCS code
or
Choose Of
CTCSS code
or
Choose 0 to 83
9