Activating / Deactivating The Alarm; The Snooze Function; The Projector Function; Activating The Projector - Oregon Scientific RM622P Manual Del Usuario

ACTIVATING / DEACTIVATING THE ALARM

To activate the alarm on, press the
bell icon will appear to the left of the alarm time).
To deactivate the alarm, press the
bell icon disappears.

THE SNOOZE FUNCTION

To use the Snooze function, while the alarm is ringing,
press the SNOOZE / LIGHT button to stop the alarm
sound and activate the Snooze function.
When the Snooze function is enabled, the Snooze
period will last 8 minutes.
NOTE The Snooze function will be disabled if the
button is pressed.
NOTE When the Snooze function is enabled, the Bell
Icon will be flashing.
button. (The alarm
button so the alarm
8

THE PROJECTOR FUNCTION

The projector displays the time on your ceiling for easy
viewing in a darkened room.

ACTIVATING THE PROJECTOR

To turn on the projector:
Press the SNOOZE / LIGHT button to activate the
projector for 5 seconds.
OR
Slide the PROJECTION switch to ON to activate
continuous projection. However, this function will not
work unless the AC/DC adaptor is used.
If the unit is being run on batteries then the PROJECTION
ON switch does not need to be on. If you hit the SNOOZE
button then the projection will happen anyway.
To deactivate the projection, slide the PROJECTION
ON switch to the "off" position.