Reception Signal; Clock; Alarm - Oregon Scientific RM939PA Manual De Usuario

RM939PA
• WWVB-60 generated from the atomic clock in Fort
Collins, Colorado.
The radio signal range is 3219km (2000 miles).
For RM939P slide the UK / EU switch to the
appropriate setting for your location. RESET whenever
you change the selected setting.

RECEPTION SIGNAL

Once batteries have been installed
it is searching for a signal.
STRONG
To force a signal search and enable / disable the clock
radio signal reception, press
will then disappear from the display.

CLOCK

You only need to do this if you have disabled the clock
radio reception, or if you are too far from the radio
signal.
To manually set the clock:
1. Press and hold CLOCK for 2 seconds. The setting
will blink.
will flash to indicate
WEAK NO SIGNAL
/ and hold for 2 seconds.
2. Use / to change the setting.
3. Press CLOCK to confirm.
4. Repeat steps 2 and 3 to set the time zone offset, 12 /
24 hour format, hour, minute, year, day-month format,
month, day and language.
5. Press CLOCK ALARM or MOTION ALARM to exit
settings mode.
For the RM939PA, the time zone options are (-8)
Pacific, (-7) Mountain, (-6) Central, and (-5) Eastern.
The language options are: English (E) French (F),
German (D), Italian (I), and Spanish (S).
To change the clock display:
Press CLOCK to toggle between: Clock with Seconds,
Clock with Day and Clock with Time Zone Offset.

ALARM

Two daily alarms can be activated. The alarm sound
can be a melody, beeping tone or vibration. (Vibration
wake-up device VR101 / VR101A must be purchased
separately).
4