Temperature And Humidity; View Temperature And Humidity Area; Select Measurement Unit; Select Sensor Channel - Oregon Scientific BAR998HGN Manual Del Usuario

TEMPERATURE AND HUMIDITY

The weather station can display the following information
from any of the 5 remote sensors:
•
Current, minimum, and maximum temperatures and
relative humidity percentages.
•
Heat index that shows the apparent, or felt, current
temperature, trend line, and minimum / maximum
readings.
•
Comfort level indicator and trend line (rising, falling,
or steady).
Data is collected and displayed every 60 seconds.

VIEW TEMPERATURE AND HUMIDITY AREA

Press SELECT to navigate to the Temperature and
Humidity Areas.
Temperature and Heat Index
data is given at the top;
Humidity is below.

SELECT MEASUREMENT UNIT

° °
Press C / F on the back of the weather station.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 5.
The house icon shows the
selected remote sensor.
To auto-scan between sensors, press and hold CHANNEL
for 2 seconds. Each sensor's data will be displayed for
3 seconds.To end auto-scan, press CHANNEL or
MEMORY with the Temperature / Humidity Area selected.
NOTE
If you select a sensor that collects only
temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

Press MEMORY repeatedly to
view current, maximum and
minimum records for the selected
sensor. To clear the records, press
and hold MEMORY for 2 seconds.
A beep will sound to confirm that
the memory has been cleared.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the Temperature and
Humidity readings.
Trend Rising
ICON
14
Steady Falling