Thermo / Hygro Sensor Setup (Rtgr328N); Fold Out Stand - Oregon Scientific BAR998HGN Manual Del Usuario

THERMO / HYGRO SENSOR SETUP (RTGR328N)

1. Open the battery compartment with a small Phillips
screwdriver.
2. Insert the batteries.
3. Set the channel and radio signal format. The
switches are located in the battery compartment.
SWITCH OPTION
Channel Channel 1 – 5. If you are using
more than one sensor, select a
different channel for each sensor
Radio Signal EU (DCF) / UK (MSF)
Format
4. Press RESET. Then set the temperature unit.
SWITCH OPTION
°C / °F
Temp
5. Close the battery compartment.
6. Secure the sensor with the wall mount or using the
fold-out stand.

FOLD OUT STAND

1. Fold-out the stand
2. Lock it into place
For best results:
•
Insert the batteries and select the unit, channel, and
radio signal format before you mount the sensor.
•
Place the sensor out of direct sunlight and moisture.
•
Do not place the sensor more than 70 meters
(230 feet) from the main (indoor) unit.
•
Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls,
and furniture.
•
Place the sensor in a location with a clear view to
the sky, away from metallic or electronic objects.
NOTE The transmission range may vary and is
subject to the receiving range of the main unit.
You may need to experiment with various locations to get
the best results.
7
1
2