Basic Cleaning; Operation; Changing The Brush Adapter - ViSAGE HB-850 Manual Del Usuario

Basic cleaning

− Remove the packaging material and all protective foils.
− Before first use, wipe the hot air brush off with a soft, damp cloth to remove
any packaging and production residue.

Operation

CAUTION!
Burn hazard!
There is a burn hazard if you use the hot air brush without
the brush adapter, for drying non-human, synthetic hair or
clothing being worn on the body. There is a burn hazard if you
change the brush adapter while the hot air brush is switched
on or hot.
− Do not use the hot air brush without a brush adapter.
− Do not use the hot air brush to dry synthetic hair.
− Do not use the hot air brush to dry clothing.
− Always keep sufficient distance to body parts during use.
− Always switch the hot air brush off and pull the power
plug before you change the brush adapter.
− Make sure that the brush adapter is no longer hot before
removing it.

Changing the brush adapter

Adjust the size of the brush adapter used to the length of your hair.
Use the volume brush for long hair and the round brush for shorter
hair.
This hot air brush includes two different brush adapters which you can change:
The round brush adapter
Proceed as follows to change the brush adapter:
1. Make sure that the power plug has been pulled.
2. Make sure that the function switch
3. Turn the locking ring
off (see Fig. A and B).
5 and the volume brush adapter
2
4 to the right and take the brush adapter
is set to the 0 position (see Fig. D).
Operation
6 .
5 or 6
13