Selecting A Heat Setting; Styling Your Hair - ViSAGE HB-850 Manual Del Usuario

Operation
4. Attach the desired brush adapter to the hand piece
5. Turn the locking ring to the left.
The brush adapter will audibly lock into place (see Fig. C).
You can now use the hot air brush.

Selecting a heat setting

The following table provides an overview of the possible heat settings.
Heat setting
Position 0
Position 1
Position 2
Position C

Styling your hair

1. Make sure that the function switch
2. Only connect the hot air brush to a properly installed socket.
3. Turn the function switch to the desired heat setting (see table in the chapter
section "Selecting a heat setting").
4. Separate a strand of hair from the rest of your hair.
5. Place the hair tips on the brush adapter
6. Push the "direction of rotation" switch
your strand of hair onto the brush adapter (see Fig. C).
7. Depending on the desired intensity, hold the wound up strand of hair on
the brush adapter for a brief moment.
8. If necessary, use the cold air function to fix your hair. To do so, turn the
function switch to position C.
9. To unwind the strand of hair again, push the "direction of rotation" switch
in the opposite direction as you would when winding the strand of hair.
10. Repeat the process for all strands of hair.
11. To switch off the hot air brush, turn the function switch to the 0 position.
12. If you no longer wish to use the hot air brush, pull the power plug out of
the socket.
13. Let the hot air brush cool off completely.
14. Clean the hot air brush as described in the chapter "Cleaning".
14
Property
Off
hot low airflow
hot high airflow
cold high airflow
is set to the 0 position (see Fig. D).
2
(see Fig. A).
5 or 6
3 in the desired direction to wind
(see Fig. A and B).
7