Alpinestars SMX Plus Información Importante página 3

CARE
When dirty the boots are best cleaned under running
water using a sponge. High-pressure washing is not
recommended. Never clean the boots with strong
cleaning agents or solvents, as these could weaken the
materials or affect the colour and finish of the plastic.
After washing, use a cloth to wipe away any surface
water and then place the boots on their sides to dry
naturally. This helps to keep the top of the boot from
compressing the ankle area of the boots. If the boot has
an inner bootie, this must be removed and allowed to dry
properly. Do not attempt to dry the boots using a direct
heat source such as a fireplace or a radiator as this will
cause the leather to become stiff.
STORAGE
Between rides, keep the boots closed properly to better
maintain their shape. Always store your boots in a well-
ventilated area. Do not store your boots in humid areas
such as cellars or in non-breathable containers such as
plastic bags, this promotes the growth of mould which,
as well as the foul smell, can also damage the boots over
time. Thus if you plan to store your boots for an extended
Alpinestars makes no guarantees or representations, express or implied, regarding the fitness of its
products for any particular purpose.
Alpinestars makes no guarantees or representations, express or implied, regarding the extent to
which its products protect individuals or property from injury or death or damage.
ALPINESTARS DISCLAIMS ANY RESPONSIBILITY FOR INJURIES INCURRED WHILE WEARING
ANY OF ITS PRODUCTS.
NOT TO BE REMOVED EXCEPT BY CONSUMER
IMPORTANT INFORMATION
v 2.8 - Printed 2018
period, it is important to check that they are dry. Store
them in their box in a well-ventilated area, and put some
soft paper in the toe area to retain the form of the boot.
MAINTENANCE
For leather maintenance, it is important to occasionally
use a leather-conditioning product such as Alpinestars
bee wax. This will increase the life span of the product
and also help maintain the softness and flexibility of the
leather. The user should inspect that the sole still has
adequate tread depth and that the buckles still function.
In the event of an accident the boots should be thoroughly
inspected for damage.
If the boot can no longerbe fastened properly, or there are
any holes or tears visible, the boots are no longer suitable
for use and must be replaced. Under no circumstances
should theuser modify and/or repair
themselves. A repair service is offered by Alpinestars
DISPOSAL
The boots should be disposed with respect for the
environment and in accordance with local waste
regulations. There are no controlled substances used in
the manufacture of the product.
ALLERGY ADVICE
Persons who have skin allergies to synthetic, rubber or
plastic materials that may be found in footwear, should
monitor carefully their skin each time the garment is
worn. In the event any irritation of the skin occurs,
immediately stop wearing the footwear, and seek
medical advice.
LIMITATIONS OF USE
These boots are intended for use while motorcycling,
and will ONLY provide limited protection against
abrasion, cuts by blunt objects and lateral compression
of the foot. Users should be aware that no item of
footwear can provide complete protection against
injury. Users are responsible for verifying that their size
is correct, all fasteners are secured and that the boots
are fitted correctly. Users should also be aware that
different environmental conditions (such as high or low
temperatures) can influence the performance of the
protection and cut resistance.
the boots