Wet Vacuuming; If Unexpected Difficulties Arise; Customer Service - Hoover S 5135 Manual Del Usuario

Wet vacuuming

Always remove the filter assembly (figure
D+E) before commencing wet vacuuming,
since otherwise the filter assembly will be
ruined. Do not forget to unplug the power
cord before removing the motor housing (2)
from the tank.
When vacuuming out containers in which the
liquid level is higher than the top of the collecting
bin and which have a larger volume than the
capacity of the collecting bin, liquid can continue
to be vacuumed beyond the capacity of the
collecting bin if the float valve is closed.
In such cases, vacuum only in partial amounts and
intermittently empty the collecting bin.
Lift the tube and flexible hose out of the liquid first and
then turn off the appliance afterwards, in order to
prevent an overflow of liquid.
Keep the float valve (27, fig. K) clean and
accessible at all times. It automatically interrupts
vacuuming when the collecting bin is full.
After completion of wet vacuuming, please clean
and dry the appliance and the accessories used.

If unexpected difficulties arise

If your appliance does not operate to your satisfaction,
you do not have to contact customer service straight
away. Please check first as to whether the fault is due
one of the following minor causes:
Dust escaping from suction sockets:
- Has the filter system been fitted in accordance with
the instructions?
- Has an original HOOVER filter been used?
Gradual reduction in suction power:
- Are the pores of the paper filter bag clogged up by
dust or soot?
- Is the collecting bin full?
- Is there a blockage in the nozzle, extension tube or
flexible hose?/Stretch the flexible hose while the
appliance is switched on – this will loosen the
obstruction.
Water is coming out of the air expulsion
openings of the appliance during
vacuuming:
- Is the float (figure K) blocked when vacuuming liquid
and unable to operate?
8
Sudden reduction in suction power
- Has the float stopped the flow of air? This can
happen if the appliance is standing at a slant or if
the appliance falls over. Turn off the vacuum
cleaner – the float will fall back into place – the
appliance is ready for use again.
The motor does not function:
- Is there damage to the mains cable, plug or socket?
- Pull out the plug before checking.
- Never open the motor yourself!

Customer Service:

To obtain approved HOOVER service and genuine
HOOVER parts, please call: Gias Customer Service
08705400600 or your nearest Hoover Service Centre.
Ensure that all service and repairs are carried out by
an authorised Hoover Service Engineer.
Use only genuine Hoover spare parts. Always identify
your cleaner by the complete model number when
requesting information or ordering parts. (The model
number appears on the back of the cleaner body.)
HOOVER LTD Pentrebach,
Merthyr Tydfil,
Mid-Glamorgan
CF48 4TU
Gias Customer service 08705 400600
Hoover Spares 01204 556111
Guarantee
Your new appliance is fully guaranteed for 12
months against electrical/mechanical breakdown
excluding:
a) Any faults which occur due to incorrect
installation or misuse of the machine or
accidental damage.
b) Repair of, or interference with the machine by
any person not authorised by the
manufacturer to carry out service.
c) Any parts which are fitted to the machine
which are not original manufacturers parts.
d) Non-domestic use of the machine.
e) Operation at incorrect voltage.
The guarantee applies to Great Britain and
Northern Ireland only. The aforegoing does not
affect your statutory rights.