Safety Instructions - Anker NEBULA Solar Manual Del Usuario

Safety Instructions

Read all instructions before you use this device. Do not make any changes or create
settings that are not described in this manual. If physical injury, loss of data or damage
is caused by failure to follow instructions, the warranty does not apply.
Setup
• To reduce the risk of fire and / or electric shock, do not expose the device to rain
or moisture. Objects filled with liquids, such as vases, should not be placed on this
device.
• Do not place this device on soft surfaces such as tablecloths or carpets, otherwise
the device could be a fire hazard.
• Do not place this device in areas susceptible to excessive dust and dirt or near any
appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation openings.
• Never place this device in a confined space. Always leave enough space around this
device for ventilation.
• Protect this device from overexposure to direct sunlight, heat, large temperature
fluctuations and moisture. Avoid extreme temperatures. The suitable operations and
storage temperature for this device and its accessories is 41°F to 95°F/ 5°C to 35°C.
• When this device is running for a long period of time, the surface may become hot.
Shut it down immediately and unplug the charger. Resume operation after this
device has cooled down.
• Always handle this device with care. Avoid touching the lens. Do not allow children
to handle the device without supervision.
• Never place heavy or sharp objects on this device.
• To avoid electric shock, do not disassemble.
• Use attachments or accessories specified by the manufacturer only.
• Avoid extreme vibrations as they may damage the internal components.
Power Supply
• Use only the provided power adapter.
• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from this device.
• Unplug this device if there are lightning storms or when unused for a long period of
time.
• Where the power plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
• Before you make or change any connections, ensure that all devices are
EN
02