Dash Disassembly - Metra 99-7807 Instrucciones De Instalación

1. Unclip and remove the trim panel from
above the glove box located on the
right side of the factory radio. (Figure A)
2. Unclip and remove the trim panel
located on the left side of the factory
radio. (Figure B)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
3. Remove the (2) Phillips screws from the
left and right side of the factory radio.
(Figure C)
4. Unsnap and remove the factory air vents
located above the radio. (Figure D)
Continued on next page
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com