Projection Function; Troubleshooting Guide - Oregon Scientific RM816P Manual Del Usuario

PROJECTION FUNCTION

Press the [SNOOZE/LIGHT] button and the projection of current time will be acti-
vated for approximately 5 seconds. You can swivel the projector to the front or back
by 90° to facilitate the projection angle.

TROUBLESHOOTING GUIDE

This section includes a list of frequently asked questions for problems you may
encounter. If your device is not operating as you think it should, check here before
arranging for a service.
Problem
Clock time is not
correctly set.
No Alarm
Operation Not
Normal
Symptom
No radio signal
Electromagnetic inter-
reception. ference or objects are
barring reception.
Orientation or place-
ment of main unit is not
optimum for receiving
radio clock signal.
Alarm does not
Alarm is disabled.
sound.
Certain func- Device requires reset. Reset the unit with a
tions do not
perform.
Check This
9
Remedy
Place the main unit
far away from PCs,
phones, and other
electronic equip-
ment and near a
windowsill. Wait for
at least 24 hours.
Turn on the alarm
setting.
blunt stylus pressed
against the [RESET]
Hole.