Meter Memory; Reviewing Test Results; Reviewing Blood Glucose Day Average Results - GlucoRx Vet TD-4268 Manual Del Propietário

METER MEMORY

The meter stores the 1000 most recent blood glucose test results
along with respective dates and times in its memory. To enter the
meter memory, start with the meter switched off.

Reviewing Test Results

1. Press and release M.
" " will appear on the display. Press M again, and the first reading
you see is the last blood glucose result along with date, time and the
measuring mode.
2. Press M to recall the test results stored in the meter each time you
press. After the last test result, press M again and the meter will
be turned off.
Reviewing Blood Glucose Day Average Results
1. Press and release M. When "
pressing M for 3 seconds until the flashing "
M and then your pet's 7-day average result measured in general
mode will appear on the display.
2. Press M to review 14-, 21-, 28-, 60- and 90- day average results
stored in each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory. Keep pressing the M and the meter will
turn off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing M for 5 seconds or
leave it without any action for 3 minutes. The meter will switch off
automatically.
• When the memory is full, the oldest test result will be replaced by the
newest test result.
• Control solution results are NOT included in the day average.
" appears on the display, keep
" appears. Release
19