3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3) Set dispenser down.
Figure 3
Recommended mounting locations
4. Drill into wall at four marked locations with an
appropriate drill bit. (See Figure 4)
Figure 4
Figure 6
PAGE 2 OF 9
MOUNTING INSTRUCTIONS CONTINUED
LOADING INSTRUCTIONS
Folded
Edge
5. Hold dispenser over previously drilled holes and
insert screws. (See Figure 5)
Figure 5
CAUTION: Do not overload dispenser.
NOTE: It is recommended that this dispenser
be refilled when towels reach the center of the
refill indicator slot. (See Figure 1)
NOTE: Dispenser will accept C-fold or multi-fold
paper towels.
LOADING MULTI-FOLD TOWELS
1.
When loading multi-fold towels, make sure that
folded edge is down and toward rear of dispenser.
(See Figure 6)
0521 IH-7556