Blower Function - Comet Spa CM 30 S Manual De Instrucciones

USE
WET & DRY VACUUM CLEANER PRECAUTIONS
Dry vacuum cleaner
see fig. ③
Wet vacuum cleaner
see fig. ④
26• The equipment should not be used to pick up
water from containers, lavatories, tubs, etc.
14• These machine are not designed for picking
up health endangering dusts or inflammable/
explosives substances.
23• Before vacuuming liquids, check the float
functions correctly. When vacuuming liquids,
and when the tank is full, a fl oat closes the
suction opening, and the vacuum operation
is interrupted. Then switch off the machine,
disconnect the plug and empty the tank.
Regularly clean the water level limiting device (fl
oat) and examine it for signs of damage.
25• If foam/liquid should come from the machine
exhaust switch off immediately.
• If the appliance is used with especially fine dust
(size below 0.3 µm) the filter supplied will re-
quire cleaning more frequently. For especially
demanding applications, the use of specific
filters supplied as an optional (Hepa) may be
necessary.
ASH VACUUM PRECAUTIONS
see fig. ⑤
• • Do not vacuum hot ashes, burning coals
or liquids. Make sure that the material to be
vacuumed is not burning.
• • If ashes hose C becomes hot during use, turn
the device off immediately and let it cool.
• • Do not empty the drum into a container
which is easily inflammable and make sure
that the ashes are completely cool.
• • Always check the contents of the drum; the
ashes must never reach the suction inlet H.
If there should be a reduction in the suction power:
1) • Be sure that switch is in off position (0) OFF
and connect the machine to a suitable socket.
•The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable filters for the proper use.
•Never use the appliance without filters .
• Use the most suitable accessories for the reques-
ted usage.
• Put switch on (-) ON position in order to start the
machine.
• (see fig. ⑦) Pneumatic filter shaker T If there
should be a reduction in the suction power, ope-
rate the filter reset buton T several times to reset
the filter .
• When job is over, switch off (0) OFF and keep
away the plug from the socket.
2) If the drum's suction force decreases, verify how
full drum I is and if necessary, empty it.
3) Check if the net of drum F is clogged. If necessary,
clean it with a jiggling movement, a brush or by
washing it.
• When the stove or fireplace has been cleaned, the
appliance and suction filter must then be cleaned

Blower function

see fig. ⑥
13
EN