Getting The Child Out Of The Seat; Installing The Seat In Theforward Facing Position Using - Be Cool star Manual Del Usuario

EN
To adjust the headrest (2) pull the lever handle
3.3-
(1) on the top. It should be set to the right position, this
means that the shoulder harness should come out
approximately 1 cm above the child's houlders.
3.4- Tighten the harness by pulling the strap (8), it
should fit the child snugly.
5.1- Once the child is securely strapped in, you can
recline the seat by pressing the button (9) to the
required position.

5. GETTING THE CHILD OUT OF THE SEAT

To get the child out of the seat, you should first place
the seat into the loading position (2.2).
Loosen the harness straps by pressing the
3.5-
adjustment button.
3.1-Then unfasten the buckle to remove the child.
32
Please make sure that the child gets out of the
vehicle on the pavement side.
6. INSTALLING THE SEAT IN THE-
FORWARD FACING POSITION USING THE
VEHICLES SAFETY BELT
FROM 100CM TO 145CM, ≥18.5KG:
STORING THE 5-POINT HARNESS:
Once the child reaches a weight of 18.5kg the 5-point
safety harness should be stored away and the child
should be secured with the vehicle safety belt.
4.1- To store the 5-point safety harness away it needs
to be fully loosened first.
Press the red release button and undo the harness.
Lift the cover under the cushion and store the buckle
parts in the compartment. Then put the cover back
on the seat.