Personal Safety - PRINCESS HOUSE Precision 1800 Plus Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If using the Induction Burner with an extension cord, the marked electrical rating must be
15 amps or greater and be a grounding-type 3-wire cord.
Do not connect Induction Burner to more than one extension cord and do not connect other
appliances to the extension cord when in use with the Induction Burner.
Extension cord should always be arranged so that it cannot be pulled on or tripped over.

PERSONAL SAFETY

This Induction Burner emits an electromagnetic field. Persons with cardiac-implanted
pacemakers or other implantable heart devices should consult with their physician
X
before using.
Do not touch the hot cooktop surface or cookware. It may remain hot for several minutes
after use.
Do not move the Induction Burner during cooking or with hot cookware on top.
Do not place metal objects on the cooktop other than metal cookware. Do not place the
Induction Burner on any metal surface. Metal surfaces and other metal accessories may
become very hot during cooking.
Do not heat unopened cans of food. The cans could explode.
Do not use in or around flammable or explosive environments.
Administer close supervision when operating around children.
Electric shock hazard. Never attempt to repair the Induction Burner yourself. This will void the
product warranty.
This Induction Burner can be used outdoors if under a patio or other enclosure to prevent any
rain, snow or moisture from coming into contact with it. Never leave the Induction Burner
outdoors when not in use.
PRODUCT & PROPERTY DAMAGE
You may preheat cookware based on cookware instructions.
Do not place objects heavier than 50 pounds on the cooktop surface.
Do not block the air inlet or exhaust fan.
Do not operate Induction Burner on flammable surfaces.
Do not clean Induction Burner in a dishwasher.
Do not use Induction Burner for anything other than its intended use.
Do not place objects with a magnetic strip near the Induction Burner while in operation.
Use a dedicated 120V, 15-amp electrical outlet that is not shared with other appliances to
avoid overheating or shutdown.
Keep the rear and sides of the Induction Burner unobstructed and at least 6 inches from walls
for proper ventilation.
3

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido