Program Mode - PRINCESS HOUSE Precision 1800 Plus Manual De Instrucciones

TEMPERATURE MODE (15 adjustable settings from 100°F to 450°F)
Use the TEMP MODE when more accurate temperature control is needed. There
are 15 settings from 100°F (ideal for simmering) to 450°F (ideal for boiling) in
25°F increments. The built-in sensor measures the temperature of the bottom of
your cookware and not the temperature of the food you are cooking. Temperature
fluctuations may occur depending on the cookware; this is normal.
Listed temperatures shown in the LCD Display are a guideline.
• To use the TEMP MODE, touch the TEMP button. Touch again to revert back to the default
Heat Mode. The LCD DISPLAY will show the default temperature setting of 100°F and the
thermometer symbol.
• Set the desired temperature between 100°F and 450°F by touching the UP or DOWN buttons.
• Anytime during use, touch the BOIL/SIMMER button to switch between the Boil and
Simmer function.
TEMP MODE examples for reference. Actual temperature accuracy will depend on cookware size.
TEMP SETTING
100°F
125°F-150°F
175°F-250°F
275°F-325°F
350°F-400°F
425°F-450°F
180-MINUTE AUTOMATIC TIMER
The TIMER can be set from 1-180 minutes when using either Heat or Temp Mode.
The timer is adjustable in 1-minute increments. Quickly touch the button for
1-minute increments. By holding the Up or Down button for a few seconds, it will
advance in 5-minute increments.
Touch the TIMER button. The timer icon will show in the LCD Display with the minutes
•
flashing.
• Use the UP or DOWN buttons to increase or decrease the TIMER setting. After a few seconds
the set time will lock-in.
• When the desired set time is entered, the timer icon will flash during countdown until all set
minutes have lapsed. The unit will then go into auto shutdown mode. In the HEATING mode,
it is normal for the set time and set power level to alternate in the lower display window.
FUNCTION LOCK
Touch the LOCK button at any time during use to lock in your settings and avoid
accidental changes.
To unlock, touch and hold the LOCK for 3 seconds or power the Induction Burner
off and restart.

PROGRAM MODE

The PROGRAM MODE is a separate function from the HEAT and TEMP modes
previously described. Use this mode to program up to 3 separate time (minutes)
and temperature stages from 100°F to 450°F and up to 180 minutes on the timer
for each stage.
COOKING LEVEL
Simmer
Low
Medium Low
Medium
Medium High
High
COOKING TASK
Simmer
Keep Warm
Sauté/Soups
Boil
Boil/Fry/Sear
Boil/Fry/Sear
7