eTIGER ES-K1A Manual Del Usuario página 13

EN
Disarming by RFID tag
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlock it.
2. Press [*] to activate the RFID reader for 10 seconds.
3. Within the next 10 seconds, swipe the RFID tag in
front of the reader to disarm the system.
The RFID reader turns off when a RFID tag is swiped in front of it, when the key [*] is pressed
again on the keypad, or after 10 seconds without operation.
Home Mode
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlock it.
2. Type your user code or admin code.
3. Press the [ ] key: the LED indicator blinks once,
the keypad beeps once and sends the signal to the
control panel to switch to Home Mode.
When the alarm panel receives the signal, the siren beeps once and the Home Mode
indicator lights up: the alarm system is now in Home Mode.
All the sensors in regular zones are armed except those in the Home Mode zone. The
sensors in the Home Mode zone are disarmed so that users can move inside their home.
For more information on the setup of zones, please refer to the user manual of your
eTIGER alarm system.
13