Preparation Before Use - eTIGER ES-K1A Manual Del Usuario

Preparation Before Use

How to turn the ES-K1A on
The ES-K1A is powered by 3 AAA batteries. Before using for the first time, open the back of the
keypad and insert the batteries.
1. Unscrew and open the case.
2. Insert the batteries according to the positive and negative signs. Make sure to
respect polarity !
3. Close the case and screw it back.
Remark
Because of the tamper switch, opening the rear cover of the keypad when the latter
is on triggers the alarm. In such case, stop the alarm by disarming the system, as
explained in page 12 of this manual.
EN
7