Metra 99-7342 Instrucciones De Instalación página 4

To the 99-7342 radio trim panel:
1. Snap the factory A/C vents into the A/C
vent trim panels. (Figure A)
2. Attach the A/C vent trim panels, and
the factory climate control panel, to the
radio housing using the (10) #8 x 1/2"
Phillips screws, and (2) #8x3/8" pan-
head screws provided. (Figure B)
3. Attach the clock display using the
factory hardware.
4a. 2011-2013 models:
• Snap the factory hazard switch into
the driver side A/C vent trim panel.
• If applicable, snap the passenger
airbag light into the passenger side
A/C vent trim panel. If not applicable,
attach the passenger airbag light
blank plate to the passenger side A/C
vent trim panel using the (2) #8 x 1/2"
Phillips screws provided.
4
KIT PREPARATION
4b. 2014 models only:
• Secure the hazard switch blank plate to the driver
side A/C vent trim panel using the (2) #8 x 1/2"
Phillips screws provided.
• Attach the thermistor mount and factory thermistor to
the passenger side A/C vent trim panel using the (2) #8
x 1/2" Phillips screws provided. It may be necessary to cut
or file a small section of the sub-dash to allow clearance
Continue to Kit Assembly
(Figure A)
(CONT.)
(Figure B)
|
1.800.221.0932 MetraOnline.com