Recording Traffic Information Messages; Adjusting The Timers - Blaupunkt San Francisco CD72 Manual Del Usuario

TIM
"NO TIM" appears briefly in the display
if no messages have been recorded.
After the last message is heard, the unit
returns to the previous mode of opera-
tion.
If you want to return to radio mode with-
out first having to listen to all the mes-
sages,
➮
press the TUNER button < twice
or the joystick OK 7.
Selecting TIM messages
"TIM" and the message number are dis-
played on both sides of the display
alongside the top two softkeys.
If you want to listen to one of the dis-
played messages without listening to
the other messages:
➮
Press the softkey 4 assigned to
the corresponding display item
"TIM1", "TIM2", "TIM3" or "TIM4".
Recording traffic information
messages
Whilst the unit is switched on, traffic in-
formation is recorded automatically if a
traffic information station is received and
priority for traffic information messages
is activated.
If you are listening to a station that does
not broadcast traffic information and you
switch the unit off whilst the TIM func-
tion is activated, the unit will automati-
cally search for a traffic information sta-
tion.
8

Adjusting the timers

If TIM is activated, the traffic informa-
tion messages provided by a tuned traf-
fic information station will be recorded
for 2 hours after the unit is switched off.
Furthermore, you can set two timers that
record all traffic information messages
received 30 minutes before and 90 min-
utes after the set times. The timer func-
tion uses the system time as its refer-
ence. For details on setting the system
time, refer to the chapter entitled
"CLOCK – time"
To adjust one of the timers,
➮
press the TUNER button < in ra-
dio mode.
➮
Press the softkey 4 assigned to
the "TIM" display item.
The TIM menu is displayed.
➮
Press the softkey 4 assigned to
the "SET" display item.
➮
Press the softkey 4 assigned to
the "REC1" display item for the first
or "REC2" for the second timer.
"RECORD" and the set time appear in
the display.
To adjust the timer,
➮
move the joystick 7 to the left.
The hours flash.
➮
Move the joystick 7 up or down to
adjust the hours.
➮
Move the joystick 7 to the right to
change the input position.
The minutes flash.