Switching the REG function (regional
programmes) on/off
Some RDS stations divide their programmes into region-
al programmes with diff erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
u In the radio menu, press the REG button to switch
the REG function on or off .
The REG button is illuminated if the REG function is
switched on.
Switching the AF function (alternative
frequencies) on/off
If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
u In the radio menu, press the AF button to switch the
AF function on or off .
The AF button is illuminated if the AF function is
switched on.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the auto-
matic station seek tuning fi nds only strong stations or
also weaker stations that may be noisy.
u In the radio menu, press the Loc button to set the
sensitivity of the station seek tuning.
If the Loc button is illuminated, the seek tuning lo-
cates only strong stations.
Traffi c information
In the reception region Europe, an FM station can iden-
tify traffi c announcements via an RDS signal. If priority for
traffi c reports is switched on, a traffi c report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Note:
The volume is increased for the duration of the
switched-through traffi c announcement. You can ad-
just the minimum volume for traffi c announcements.
Switching priority for traffi c announcements on/off
u In the radio menu, press the TA button to switch the
priority for traffi c announcements on or off .
The TA button is illuminated if the priority for traffi c
announcements is switched on.
All manuals and user guides at all-guides.com
Setting the minimum volume for traffi c
announcements
u In the radio menu, press the [
u In the options menu, press the TA VOL button.
u Adjust the desired volume with the [ ] or [ ] but-
u Press the [
Navigation
Loading navigation data
The navigation software and map data are located on a
MicroSD card. For devices with navigation, the device is
delivered with the MicroSD card in the MicroSD card slot.
To be able to use the navigation, the MicroSD card must
be inserted in the card slot.
u Open the MAP cover of the card slot
u Insert the MicroSD card with the printed side up into
u Close the cover of the slot.
Download of map data
To ensure that you have the latest version of the map
data when you purchase the Philadelphia 835, you have
30 days from the fi rst GPS positioning to download the
latest version of the map data once and free of charge
to the standard MicroSD card from the Internet at
www.naviextras.com.
You can always purchase map material from this site at
a later time.
Starting the navigation
u Press the NAVI button
u Press the SRC button
u In the main menu, press the Navigation button.
Radio mode | Navigation
ton.
] button.
The radio menu is displayed again, the set volume
is stored.
the slot until it engages.
Important note:
If the MicroSD card is lost or damaged, the naviga-
tion map license associated with the card will be lost.
In this case, the license must be purchased anew with
a new MicroSD card.
3
.
- or -
4
Navigation source is selected.
- or -
The navigation menu is displayed. If you start the
navigation for the fi rst time, the setup wizard is dis-
played.
] button.
8
.
repeatedly until the
31