Kohler K-6627 Guia De Instalacion página 6

3"
(7.6 cm)
Undercounter Installations
4. Locate Faucet Centerline
Undercounter Installations
NOTE: The following instructions apply to countertop faucet
installations for undercounter sinks. For installations where the
faucet will be installed directly to the sink, proceed to the "Knock
Out the Faucet Hole" section.
Locate the faucet hole centerline at least 3" (7.6 cm) from the back
edge of the cutout.
With a pencil, mark the faucet hole centerline on the countertop.
Verify there is adequate clearance between the sink, faucet,
backsplash and cabinet. Make any adjustments as needed.
Drill the faucet holes according to the faucet manufacturer's
instructions.
Dependent on your chosen undercounter installation method,
proceed to either the (undermounter kit) "Recommended
Undercounter Installation" section or the (support frame)
"Optional Undercounter Installation" section.
1050395-2-A
Backsplash
Faucet Centerline
6 Kohler Co.