Bosch PSE 180 E Manual Original página 18

OBJ_BUCH-746-001.book Page 18 Tuesday, March 17, 2009 10:45 AM
18 | English
Possible Applications:
– Removing of carpet adhesive, carpet foam or
hard foam remainders, plaster, gypsum and
mortar remainders, as well as putty and grout
– Evening out or levelling irregularities (e.g. ad-
hesive on screed)
– Loosening of flooring (e.g. carpet, PVC, cork)
SM 60 CS (2 608 691 027)
Steel, 60 mm width, extra-sharp
SM 60 HMS (2 608 691 012)
Carbide, 60 mm width, extra-sharp
SM 40 HMS (2 608 691 013)
Carbide, 40 mm, narrow, extra-sharp
SM 20 HMS (2 608 691 062)
Carbide, 20 mm, narrow, extra-sharp
e.g. for working in tight, narrow loca-
tions or in corners
The following blades are suitable for sraping off
materials that are easily removed, such as re-
mainders of adhesive or paint, even from soft
surfaces (e.g. wood, aluminium).
SM 60 HM (2 608 691 014)
Carbide, 60 mm width
SM 40 HM (2 608 691 015)
Carbide, 40 mm, narrow
Spatulas
Due to their resilience, spatuals are suitable for
work on soft and sensible surfaces (e.g. wood,
plastic, glass).
Possible Applications:
– Removing of paint remainders, silicone, gyp-
sum and rough cast on glass and plastic
sheets
– Smoothing out and removing of adhesive and
seal remainders on parquet flooring
SP 100 C (2 608 691 102)
Steel, 100 mm width, straight
SP 80 C (2 608 691 100)
Steel, 80 mm width, straight
1 609 929 N88 | (17.3.09)
SP 60 C (2 608 691 019)
Steel, 60 mm width, short
SP 60 CR (2 608 691 064)
Steel, 60 mm width, half-round
e.g. for cleaning concave surfaces
such as scaffolding tubes, shovels,
boilers
SP 40 C (2 608 691 022)
Steel, 40 mm, narrow, long
e.g. for removing putty remainders
in niched areas
Wood Chisels
Wood chisels are suitable for carving applica-
tions, but only in short-fibred softwood (e.g.
limewood, poplar).
SB 15 CF (2 608 691 016)
Steel, 15 mm cutting edge, flat
SB 18 CW (2 608 691 066)
Steel, sloped/wide, 18 mm cutting
edge, flat
SB 8 CW (2 608 691 067)
Steel, sloped/narrow, 8 mm cutting
edge, flat
SB 14 CR (2 608 691 017)
Steel, straight/wide, 14 mm cutting
edge, half-round
SB 7 CR (2 608 691 068)
Steel, straight/narrow, 7 mm cutting
edge, half-round
SB 14 CRK (2 608 691 069)
Steel, offset/wide, 14 mm cutting
edge, half-round
SB 13 CV (2 608 691 018)
Steel, straight, 13 mm cutting edge,
V-shaped
SB 13 CVK (2 608 691 070)
Steel, offset, 13 mm cutting edge,
V-shaped
SB 15 C (2 608 691 065)
Steel, blank, 15 mm cutting edge, flat
Blank, for grinding your own form
and contour
Bosch Power Tools