Sophos XGS 5500 Manual Del Usuario página 10

LEDs on each SFP+ connector
ACT/LNK Green
(Left LED)
Speed Blue
(Right LED)
Amber
Back side
Power Supply Green
8. Support and Documentation
For more information and technical support, please visit
your local Sophos reseller.
Check our Getting Started resources to find out how you can get the most out of your purchase
www.sophos.com/get-started-firewall
Quick Start Guide XGS 5500/6500
Solid 1. The SFP+ connector is receiving power.
2. Good connection between the SFP+ port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
On If SFP+ connector is operating at 10,000 Mbps.
On If SFP+ connector is operating at 1,000 Mbps.
Off Either the LED is not working or the SFP+ connector is operating at a speed below 1,000 Mbps.
Solid Power
Off No power
www.sophos.com/en-us/support or contact
ENGLISH
9